Archive for June 2022

This warehouse floor had an expansive crack of approximately 30′ in length, caused by excessive loads being placed on pallet rack shelving. The crack was stitched using five tow stitches with a cementitious mix.

This basement in Michigan had 3 structural cracks, two of them on exterior walls that were allowing for water entry. Crack stitches were installed on all three cracks approximately 12″ apart. For waterproofing, the two exterior wall cracks utilized a surface seal and injection port method for sealing the cracks and injecting them to prevent…

This large national chain retail store was experiencing severe cracking in various locations including product storage and employee break areas. Approximately 1,000 stitches were installed by United Structural Systems of Nashville, TN to permanently stop expansion of the cracking. The cracks were filled with Xtreme 4070 epoxy as part of the installation. Following installation of…